 |
|
|
| Model |
| Chuck |
| Swing Over Bed mm |
| Swing Over Carriage mm |
| Max. Turning Diameter mm |
| X-axis Travel mm |
| Z-axis Travel mm |
| Spindle Power kW |
| Spindle Nose |
| Hole Through Spindle mm |
| Hole Through Draw Tube mm |
| Spindle Speed rpm |
| Tail Stock Quill Taper-Dead Center (std.) |
| Tail Stock Quill Taper-Live Center (opt.) |
| Turret Tool Magazine Capacity T |
| VDI Live Tool Motor kW |
| Milling Functions |
| Machine Weight kg |
|
|
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
 |
| Model |
| Tool Kit
|
| Work Lamp
|
| Pilot Lamp
|
| Automatic Door
|
| Safety Door
|
| Hydraulic System
|
| Spindle Coolant System |
| Tool Holder General Tool Holder
|
| Tool Holder VDI Tool Holder
|
| Tool Holder BMT Tool Holder
|
| Milling Tool Attachments
|
| Hydraulic Hollow Chuck
|
| Hard and Soft Jaws 1 Set
|
| Additional hard and Soft Jaws
|
| Soft Jaw Former Main Spindle
|
| Soft Jaw Former Sub Spindle
|
| Collets Chuck
|
| Padel
Main Spindle
|
| Padel Sub Spindle
|
| Padel
Tail Stock Pedal
|
| Tail Stock Manual Lock
|
| Tail Stock Programmable Hydraulic Clamp
|
| Tail Stock Stationary Quill Type
|
| Tail Stock Live Quill Type
|
| Full Chip Enclosure
|
| Leveling Blocks and Bolts
|
| Foundation Screw Bolt
|
| Air Gun
|
| Air Blast Main Spindle
|
| Air Blast Sub Spindle
|
| Coolant Equipment System MTH2-30/3
|
| Coolant Equipment System MTH2-40/4
|
| Coolant Equipment System MTH4-40/4
|
| Coolant Equipment System MTH2-50/5
|
| Coolant Equipment System MTH2-60/6
|
| Coolant Equipment System CR3-36
|
| Coolant Equipment System CR3-23
|
| Coolant Equipment System MTR3-17/17
|
| Coolant Gun
|
| Oil Skimmer
|
| Paper Filter
|
| Chip Shower Coolant
|
| Oil-mist Collector
|
| Central Lubrication System |
| Chip Conveyor Right Side
|
| Chip Conveyor Rear Side
|
| Electrical Cabinet Heat Exchanger
|
| Electrical Cabinet A/C. Cooler
|
| Work Length Setter
|
| Tool Length Measurement System Main Spindle (Auto)
|
| Tool Length Measurement System Sub Spindle (Manual)
|
| Bar Feeder
|
| Parts Catcher System Main Spindle
|
| Parts Catcher System Sub Spindle
|
| Feeder Safety Clutch X
|
| Feeder Safety Clutch Y
|
| Feeder Safety Clutch Z
|
| Feeder Safety Clutch B / Tail stock |
| Transfer System
|
| CNC Control：TXP-200FC |
| CNC Control：FANUC -18iTB |
| CNC Control：TXP-100FA |
| CNC Control：TXP-200FA |
| Mechanical Electrical & Operating Manuals
|
| Steady Rest Manual
|
| Steady Rest Hydraulic
|
|
|
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
|
|
|
|
|
