Home > Products >  Double Column Vertical Machining Center  >  DCV Series > DCV4016B (FANUC)
DCV4016B (FANUC)
Double Column Vertical Machining Center
DCV Series
Back to Overview Contact Us
Add Compare My Compare
Front Page
 DCV2012A
DCV2012A
 DCV4021B
DCV4021B
 DCV4030B-5AF
DCV4030B-5AF
 DCV3018A-5AX (HEIDENHAIN)
DCV3018A-5AX (HEIDENHAIN)
     
Next Page
Products FeaturesProducts Features Specifications and AccessoriesSpecifications and Accessories
Fast and Reliable Spindle
▲4500rpm spindle speed is standard with 2-step gear transmission. The spindle incorporates dual oversized roller type spindle bearing that offers extremely high cutting rigidity. (as shown in the figure)
▲The optional 6000rpm spindle design incorporates 2-step gear transmission that directly drives the heavy duty spindle. Complimented with a high powered AC digital spindle motor and oversized ceramic roller type spindle bearings, the 6000rpm spindle is capable of reaching 22kW.
▲The optional 22kW powerful motor which can reach 10000rpm of spindle speed. Oil-air lubricaion is suitable for any high speed applicaions.
▲The optional  YCM self-manufactured HSK-A100 IDD spindle with maximum 15000rpm spindle speed and efficient cutting ability. Its good dynamic balance and rigidity are suitable for any requirement of high speed machining.
Superb Body Structure
▲Reinforced body structure through FEM analysis offers superb cutting rigidity and extends tool life.
▲Y-axis is supported by 3 oversized roller type guideways to reinforce cutting rigidity in both axial and radial direction. Two roller guides are assembled on the face of the bridge. The third one is on the tope of the bridge to enhance the holding force on the headstock.
▲X-axis is designed with over-sized roller type guideway and 10 sliders to support heavy workpiece.
▲The whole work table is assembled on the base so there is no hanging problem.
Roller Bearings Linear Motion Guides
▲Low friction for motion smoothness.
▲Dynamic and stable load-bearing capacity.
▲Superior geometric accuracy and surface quality.
▲Better anti-vibration behavior to extend tool life.
Z-axis Hardened & Ground Boxway
The female type boxway allows the weight of ram to be uniformly distributed through the dual gibs. This provides better cutting rigidity and smoother ram movement during 3D contour operations. The covering length is 20% longer than the hanging length which offers high cutting rigidity and absorbs vibration.
● Standard;○ Selectivity;─ No More;★ Customize
Model DCV4016B (FANUC)
Spindle  
Spindle Speed (opt.) rpm 4,500 (6,000/10,000)  
Max. Spindle Motor Power kW 22  
Spindle Taper BBT50  
Travel  
X-axis Travel mm 4,065  
Y-axis Travel mm 1,600  
Z-axis Travel (opt.) mm 762 (1,016)  
Distance Between Spindle Nose & Table Top mm 200~962 (450~1,212 [Raised Column 250] / 200~1,216 [Z-axis Travel 1,016])    
Distance Between Spindle Center & Table Top mm -  
Distance Between Columns mm 1,820  
Table  
Table Size mm 4,260 x 1,500  
No. T-Slots x Size x Pitch mm 9 x 22 x 150  
Max. Load on Table kg 12,000  
Feedrate  
Rapid Feedrate (X/Y/Z) m/min 15/15/15  
Cutting Feedrate mm/min 1~10,000  
ATC  
Tool Magazine Capacity (opt.) T 40 (60/120)  
Max. Tool Weight kg 20  
Max. Tool Dimensions mm ø125 x 350  
General  
Pneumatic Supplier kg/c㎡ 5.5  
Power Consumption (Transformer) kVA 63 (80)    
Machine Weight kg 35,000    
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
Model DCV4016B (FANUC)
Tool Kit
Work Light
Pilot Lamp
Coolant Equipment System
Spindle Air Blast
Cutting Air Blast
Chip Conveyor(Chain Type)
Chip Conveyor(Scraper Type)
Leveling Blocks and Bolts
Central Lubrication System
Heat Exchanger for Electrical Cabinet
A/C. Cooler for Electrical Cabinet
Full Chip Enclosure
Chip Enclosure (Extra Guard Frame on Door and Window)
Chip Enclosure
Workpiece Measurement System
Auto Tool Length Measurement System
4th Axis Rotary Table
Oil Skimmer
Dual Screw Type Chip Augers
Mechanical, Electrical & Operating Manuals
Rigid Tapping
Foundation Bolts
Optical Scale
Oil-mist Coolant System
Spindle & Gearbox Coolant System
Coolant Through Spindle System
Unclamp Pedal
Hi/Low Gearbox
Oil Hole Holder Function
Automatic Door
Heavy Duty Coolant Pump
Oil-air Lubrication System
Linear Motor Cooling System
Oil-mist Lubrication System
Air Gun
CNC Control:FANUC 18i-MB
CNC Control:HEIDENHAIN TNC640
CNC Control:MXP-200FB
CNC Control:MXP-200FC
CNC Control:FANUC 31i
*90° Angle Milling Head/2,000rpm
*30° Angle Milling Head/ 2,000rpm
*Extension Milling Head/2,000rpm
*Universal Milling Head/1,500rpm
*Z-axis Travel 1,016mm
*250mm Raised Column
STC Plus
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD. Products|Service & Support|About YCM|News|Contact|Sitemap