Home > Products >  Double Column Vertical Machining Center  >  DCV Series > DCV3025B
DCV3025B
Double Column Vertical Machining Center
DCV Series
Back to Overview Contact Us
Add Compare My Compare
Front Page
 DCV2012A
DCV2012A
 DCV4021B
DCV4021B
 DCV4030B-5AF
DCV4030B-5AF
 DCV3018A-5AX (HEIDENHAIN)
DCV3018A-5AX (HEIDENHAIN)
     
Next Page
Products FeaturesProducts Features Specifications and AccessoriesSpecifications and Accessories
High Speed High Reliability Spinlde
▲4,500rpm spindle speed is standard with 2-step gear transmission. The spindle incorporates roller type spindle bearings for extremely high cutting rigidity. The 2-step gear transmission provides 88.87kgf-m torque output at 241rpm ideal for machining hard material. (As Shown in the Figure)
▲6,000rpm spindle is available for diverse requirements. The design of 2-step gear transmission is complimented with a powerful AC digital spindle motor and ceramic roller type bearings. The 6,000rpm spindle is capable of reaching up to 22kW and 66.65kgf-m torque output at 321rpm. DCV series can easily achieve 1,000 cc/min. chip removal rate and promote productivity. (opt.)
▲10,000rpm IDD spindle is optional to be equipped with DCV series. Driven by 22kW dual step AC digital spindle motor, the spindle is able to reach max. 36.04kgf-m torque output at 500rpm. Unique IDD design offers low spindle vibration and optimal heat isolation that results n excellent accuracy after long-term operation. (opt.)
Superb Body Structure
▲Turcite-B design on Z-axis strengthens rigidity and damping capacity reducing overhang and vibration problems.
▲Extra wide column base with boots design prevents the headstock from leaning forward.
▲Internal ribs structure design through FEM analysis delivers high rigidity and stability.
▲Direct drive gearbox design on X-axis offers smooth axial response, high torque, and low backlash.
▲X-axis is equipped with 3 roller type guideways and numerous slider blocks for great load capacity. (3021B,3025B: 12 slider blocks / 4021B,4025B,4035B: 15 slider blocks)
▲3 roller type guideways on Y-axis strongly support the headstock and saddle.
Roller Bearings Linear Guideways
▲Low friction for motion smoothness.
▲Dynamic and stable load-bearing capacity.
▲Superior geometric accuracy and surface quality.
 
Fast and Reliable ATC System
▲40T (std.) and 60/120T (opt.)
▲Arm type ATC system; prevents tools from dropping; tool to tool: 3 sec.

 

● Standard;○ Selectivity;─ No More;★ Customize
Model DCV3025B
Spindle  
Spindle Speed (opt.) rpm 4,500 (6,000/10,000)  
Max. Spindle Motor Power kW 22  
Spindle Taper BT50  
Travel  
X-axis Travel mm 3,060    
Y-axis Travel mm 2,500    
Z-axis Travel (opt.) mm 762 (1,016)  
Distance Between Spindle Nose & Table Top mm 200~962 (450~1,212 [Raised Column 250] / 200~1,216 [Z-axis Travel 1,016])  
Distance Between Spindle Center & Table Top mm -  
Distance Between Columns mm 2,720  
Table  
Table Size mm 3,100 x 2,400  
No. T-Slots x Size x Pitch mm 11 x 28 x 200  
Max. Load on Table kg 15,000  
Feedrate  
Rapid Feedrate (X/Y/Z) m/min 15/15/15  
Cutting Feedrate mm/min 1~10,000    
ATC  
Tool Magazine Capacity (opt.) T 40 (60/120)  
Max. Tool Weight kg 20    
Max. Tool Dimensions mm ø240 x 350    
General  
Pneumatic Supplier kg/c㎡ 5.5    
Power Consumption (Transformer) kVA 60 (65)    
Machine Weight kg 42,000  
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
Model DCV3025B
Tool Kit
Work Light
Pilot Lamp
Coolant Equipment System
Spindle Air Blast
Cutting Air Blast
Chip Conveyor(Chain Type)
Chip Conveyor(Scraper Type)
Leveling Blocks and Bolts
Central Lubrication System
Heat Exchanger for Electrical Cabinet
A/C. Cooler for Electrical Cabinet
Full Chip Enclosure
Chip Enclosure (Extra Guard Frame on Door and Window)
Chip Enclosure
Workpiece Measurement System
Auto Tool Length Measurement System
4th Axis Rotary Table
Oil Skimmer
Dual Screw Type Chip Augers
Mechanical, Electrical & Operating Manuals
Rigid Tapping
Foundation Bolts
Optical Scale
Oil-mist Coolant System
Spindle & Gearbox Coolant System
Coolant Through Spindle System
Unclamp Pedal
Hi/Low Gearbox
Oil Hole Holder Function
Automatic Door
Heavy Duty Coolant Pump
Oil-air Lubrication System
Linear Motor Cooling System
Oil-mist Lubrication System
Air Gun
CNC Control:FANUC 18i-MB
CNC Control:HEIDENHAIN TNC640
CNC Control:MXP-200FB
CNC Control:MXP-200FC
CNC Control:FANUC 31i
*90° Angle Milling Head/2,000rpm
*30° Angle Milling Head/ 2,000rpm
*Extension Milling Head/2,000rpm
*Universal Milling Head/1,500rpm
*Z-axis Travel 1,016mm
*250mm Raised Column
STC Plus
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference.
YEONG CHIN MACHINERY INDUSTRIES CO., LTD. Products|Service & Support|About YCM|News|Contact|Sitemap